Van Accessories General
Results: 55
Abiloader-Fx
The AbiLoader-FX is a wheelchair loader for car, pickup truck, sport utility vehicle and van designed for use by people with lower extremity or mobility disabilities, spinal cord injury and other who use wheelchairs. It is intended for use with wheelchairs with fixed frames that do not fold. The device is installed in the trunk or rear storage area of a vehicle into which the folded wheelchair will fit. The AbiLoader-FX has a robotic arm with two actuators and a mechanism to grab and hold a whee
Automatic Van Door Opener (Model V6)
Automatic van door opener operates from switches inside and outside of van. Opens side sliding door. 12 volt DC motor utilizes existing van battery.
Automatic Wheelchair Lock
The Automatic Wheelchair Lock is a wheelchair restraint system for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The user can roll forward into the Automatic Wheelchair Lock, which provides a stationary and stable position for a wheelchair during travel. The anchor post for the system mounts to the floor of the vehicle. The restraint bolts to post and hooks to frame of wheelchair. It automatically unlocks at touch of the device's
B & D Transfer Seat for Full-Sized Vans, model CS61D
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
B & D Transfer Seat for Full-Sized Vans, model DP-100
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
B & D Transfer Seat for Full-Sized Vans, model FT-100
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
B & D Transfer Seat for Full-Sized Vans, Model L41
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
B & D Transfer Seat for Full-Sized Vans, model L71
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
B & D Transfer Seat for Full-Sized Vans, model LS71-DS
The B & D Transfer Seat is a transfer seat that can be installed in minivans, designed for wheelchair users who have the ability to transfer into a driver seat from their wheelchair. The transfer seat base is motorized and has controls that allow the wheelchair user to move backward into the center of a minivan and then swivel in towards the center of the van and the waiting wheelchair. Once the person transfers into the seat, the same controls are used to turn forward and then move up into
Braun Built Automatic Swing Door Operators For Rear Post Swing-A-Way Lift
Door operator package to work with swing doors in vans with the rear post Swing-A-Way lift (Chevy and Ford full size vans only). Sequenced to operate with one switch and uses the same peripheral controls as other Braun lifts. Quick release mechanism to freely open the doors in the event of a power failure.
C-Dock
The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attach
Cargo Wedge 250
The Cargo Wedge 250 is a cargo area threshold cover designed for use by people with mobility disabilities who use wheelchairs or scooters. The Cargo Wedge is a large mat made of recycled rubber that overlays a van's or minivan's cargo area to raise the level of the cargo area's floor to the same level as the rear door threshold. The Cargo Wedge can be trimmed with a utility knife or a power saw for a custom fit. It has a non-skid surface. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches. CAPACITY: 850 p
Companion Seat
The Companion Seat is an adjustable position van seat designed for use by individuals with mobility disabilities. Designed for use with the front passenger seat of Chrysler Town & Country, Dodge Caravan, Plymouth Voyager, and Ford Windstar minivan's, this unit utilizes the van's existing seat but replaces the seat base with a powered seat base. The powered seat base extends the seat a full 20 inches out from the standard seat location and tilts it 6 inches forward. To enter the van, the seat
Drive Master Drop Floor (Models V10Bf & V10B3)
Drop floor in van permanently lowers floor of van 4 to 6 inches for the width of the van and from the side or back door of van into driving and/ or passenger area. This provides proper visibility for wheelchair occupant whose head is more than 47 inches from floor when seated. This van modification requires structural modification to van; chassis of van is cut and reinforced. Not available for Dodge vans.
Drive Master Fill In Passenger Step Of Van (Model V10D)
Fill in of passenger step of van provides levels surface for movement of occupant in wheelchair. If step is not filled in and wheelchair moves over it, chair will tip over.
Drive Master Interchangeable Driver Or Passenger Seat (Model V17)
Quick release seat for van allows seat to be put in place for use by driver other than wheelchair occupant. Change of seats done by able bodied person. Seat provided with storage lock for back part of van. Seat can be used in stored position as well as in driver or passenger position. Easy to move by rolling on casters.
Drive Master Power Floor Pan (Models V10A1F & V10A2C)
Specially designed elevator in driver area to accommodate wheelchairs, will lower floor up to 6 inches to allow complete peripheral vision while driving. Available for Chevrolet and Ford sized vans. Designed for people to drive from their wheelchairs.
Drive Master V30 Custom Switch Location
Custom switch location according to needs of client. Toggle and some push/pull switches available. All switches necessary for driving can be custom positioned if needed.
Drive Master V33 Raised Side Door Opening
Raised van door facilitates accommodation of wheelchair user who is very tall or who has limited movement. White fiberglass to match Drive Master Raised Roof (see separate entry). Sizes for full, mid size and sport top offer 57 inches of head clearance for full and mid size, 53 inches for sport top.
Electric Holdown (Model 128)
The Electric Holdown, model 128, is wheelchair restraint system that may be installed for the driver or passenger wheelchair position. (Installation depends on the underside of the van.) The holdown consists of two pieces: one piece hooks to the wheelchair frame behind the casters, and the second mounts into the floor of the van. The floor mounted piece clamps onto the piece attached to the chair. The control switch mounts to the vehicle's dashboard or the most convenient position for the operat
Ez Lock
Floor mounted wheelchair restraint system secures wheelchair to floor of van. V.A. accepted. Enables user to sit forward facing or in an angled position in van. Wheelchairs can be rolled into the receiver lock mechanism by backing in or by forward entry. Safety warning signal will sound when vehicle is running while the lock is not fully set. Available with many different "H" bracket configurations to fit most manual and powered wheelchairs on the market. Warranty available.
Passenger Position Wheelchair Lock
The Passenger Position Wheelchair Lock is a wheelchair restraint system to secure a wheelchair in moving vehicle. It is attached by an attendant who locks the chair to tracks in the floor with four ratchet-tightened straps. Seat shoulder belts required.
Permolock C
The Permolock C is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C400 or C500 power wheelchairs (see separate entries). The Permolock C consists of a locking plate that is mounted on the floor of the vehicle and a spring-loaded pin attached to the wheelchair base. The wheelchair equipped with the pin approaches the locking base from the rear with pin aligned with a slot in the center of the top of the plate. A control bu
Permolock C3
The Permolock C3 is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C300, C350, K300 or K450 power wheelchairs (see separate entries). The Permolock C3 consists of a locking plate that is mounted on the floor of the vehicle and two spring-loaded pins attached to the wheelchair base. The wheelchair equipped with the pins approaches the locking base from the rear with pins aligned to two slots in the top of the plate. The pins
Power Door Operator
Electric powered door opener for full-size vans with sliding doors. Includes separate door locking mechanism to draw door tight into body. Kit includes switches and wiring for inside and outside locations. Compatible with Electro Van Lift rotary wheelchair lift.
Power Floor Pan
Van floor elevator to accommodate wheelchair driver attaches to floor of van. Will lower floor up to 6 inches with self centering toggle switch. Positions driver for proper visibility and for driving. Does not move horizontally. Individual wheel cups can also be installed in variety of floor locations for permanent positioning of wheelchair in van. For Ford, Chevrolet and Dodge vans.
Power Seat Bases
Electric powered seat bases that move seats into position for transfer to and from wheelchairs. Models available for drivers or passengers. Available with a power swivel.
Power Transfer Seat Base - 6 Way Scissor (Model 908D)
The Power Transfer Seat Base - 6 Way Scissor, model 908D, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size van to move as much as 16 inches horizontally or 8 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. OPTIONS: Seat base for drop floor full-size van with OEM power or manual seat. DIMENSIONS (
Power Transfer Seat Base - 8 Way Parallel Arm (Model 858D)
The Power Transfer Seat Base - 8 Way Parallel Arm, model 858D, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size or mini van to move as much as 16.5 inches horizontally or 5 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. DIMENSIONS (HxLxW): 8.25 x 30 x 15 inches. CAPACITY: 300 pounds total combin
Power Transfer Seat Base - 8 Way Parallel Arm (Model 858P)
The Power Transfer Seat Base - 8 Way Parallel Arm, model 858P, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the passenger's side seat in a full size or mini van to move as much as 13.25 inches horizontally or 5 inches vertically, and to swivel up to 180 degrees. No alteration of the factory seat is required for installation. OPTIONS: Special 858P for drop floor full-size van. DIMENSIONS (HxLxW):
Power Transfer Seat Base - 8 Way Scissor (Model 007)
The Power Transfer Seat Base - 8 Way Scissor, model 007, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size or mini van to move as much as 16 inches horizontally or 8 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. This model is available for a full-size van with an EOM power seat, or for a mini or
Power Transfer Seat Base - Power Swivel (Model 977)
The Power Transfer Seat Base - Power Swivel, model 977, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver or passenger side seat in a full size or mini van to swivel up to 100 degrees. No alteration of the factory seat is required for installation. OPTIONS: Power swivel with 6-way power. DIMENSIONS: Height is 1.75 inches with power swivel or 5 5/8 inches with power swivel with 6-way power.
Power Transfer Seat Base - Slide & Swivel (Model 866D)
The Power Transfer Seat Base - Slide & Swivel, model 866, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side or passenger's side seat in a full size van to move as much as 11 inches horizontally and to swivel up to 100 degrees (driver's side) or 180 degrees (passenger's side). No alteration of the factory seat is required for installation. DIMENSIONS (HxLxW): 7 x 25 x 13.75 inches
Powered Door Locks (Models V22 & V22A)
Power door locks for front and rear door. One switch unlocks all three. Allows user to open door of vehicle at touch of switch control. User must have enough strength to push switch.
Q Straint Pocket System (Model Q-5001)
The Q'Straint Pocket System, model Q-5001, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. The belts have bear clamps to adjust length and hooks to attach to frame of wheelchair and to floor pockets located in the floor of the vehicle. Lap and shoulder belts secure the occupant in the wheelchair. The complete system includes two rear belts, two front belts, , one shoulder belt, one lap belt, one shoulder belt bracket assembly, four floor pocket
Q'straint System (Model Q-5001-T)
The Q'Straint System, model Q-5001-T, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. This model can be mounted on heavy-duty, floor-mounted aluminum L track (available with or without flange; not included), wheelchair tie-down straps, and occupant shoulder and lap belts. The complete system includes two rear belts, two front belts, one lap belt, one shoulder belt, one driver instruction guide, one instruction adhesive label, and one warranty card
Qrt Retractable Securement System System (Models Q-8100-A1 & Q-8200-A1)
The QRT Retactable Securement System is a wheelchair restraint system designed to secure wheelchairs and their occupants in transit and para-transit buses. This system can be mounted on tracks, walls, swing arms, floors, seats, flip seats, or barriers. The system retracts out of sight when not in use and a hard cover protects it from damage. Model Q-8100-A1 is the deluxe system and includes four QRT automatic retractors, an all new adjustable lap/shoulder belt combination, interchangeable self-t
Raised Top (Models V32 & V32A)
Raised van top is necessary for tall driver in wheelchair to maneuver inside van and to have proper visibility for driving. Variety of sizes for different vans but not all sizes available for all vans. Roof is white fiberglass. Sport Top offers 5 feet of headroom; full size offer 6 feet of headroom; mid size give 5 feet 4 inches. Sport Top has 2 windows and luggage rails. Raised windows available separately.
Scooter Station
The Scooter Station is a wheelchair and scooter restraint system designed for use by individuals with mobility disabilities. Designed for use in full-sized vans, mini vans, and the beds of pickup trucks, this electronically-powered system requires no belts and operates with the touch of a button.
Small Item Storage Solution For Van
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry small items in a van which might get entangled in wheelchair wheels. Attach 3M picture hangers to the wall of the van within reach. They can used to hold a cell phone charger, coffee mug, and other small items. MATERIALS: 3M Picture Hangers. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/quest/extra/qe14-5_diy.html REF: Volume 14, Number 5
Smooth Floor Covering (Wood Wheelchair Flooring)
Smooth floor covering of Luan Mahogany plywood provides smooth surface over factory installed metal van floor for wheelchair access. Provides easier wheelchair movement inside van.
Sure-Lok Fe500 Series System
The Sure-Lok FE500 Series System is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The system includes over-center buckle and/or cam buckle straps with a minimum breaking strength of 6,000 pounds and 5,000 pounds, respectively. Most kits available in this system have vehicle anchoring hardware that is "positive-locking" to ensure that when the system is properly installed, the strap assemblies cannot be inadvertently released or di
Sure-Lok Heavy Duty Series A Track (Models 2025 & Fe702-01)
Sure-Lok Heavy Duty Series A Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The track is made of 11-gauge high-strength steel coated with a rust-inhibiting powder, and comes in vertical (model 2025) or horizontal (model FE702-01) styles. OPTIONS: Special length track is available. COLORS: Track is gun metal grey. DIMENSIONS: Horizontal and vertical tracks are both available in 5 or 10 feet sections. WEIGHT: A
Sure-Lok Heavy-Duty Series A Floor Plate (Model Fe200740)
Sure-Lok Heavy-Duty Series A Floor Plate, model FE200740, is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This low profile plate is made of zinc-plated steel. OPTIONS: A floor plate kit is available that inlcudes one model FE200740 floor plate, one backing plate, and bolts, nuts, and washers (four of each). WEIGHT: 1 pound.
Sure-Lok Integrated Combination Belt (Model Fe200727)
The Sure-Lok Integrated Combination Belt, model FE200727, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This system combines a shoulder belt and an integrated lap belt in a fully retractable unit. The unit retracts to the vehicle sidewall; a Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use. The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Ser
Sure-Lok Integrated Lap Belt (Model Fe200595)
The Sure-Lok Integrated Lap Belt, model FE200595, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt is intended for use with the FE500 Series Wheelchair Securement System only (see separate entry). It attaches directly to the rear strap assembly of the wheelchair securement system, and provides an occupant restraint system that is an integrated part of the wheelchair securement. Its restraint capability is dependent upon
Sure-Lok Parallel Lap Belt (Models Fe200594, Fe200600, Fe200601, Fe200612)
The Sure-Lok Parallel Lap Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt attaches directly to the floor track or plates to secure the passenger separately and independently from the wheelchair securement system. The belt's anchoring hardware is positive-locking to ensure that the belt assemblies cannot be inadvertently released or disengaged. A single push-button function allows the release and evacuation of the o
Sure-Lok Series L Single Bolt Floor Plate (Models Fe200784 & Fe200844)
The Sure-Lok Series L Single Bolt Floor Plate is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Both plates have a track section made of stainless steel and come with mounting hardware. Model FE200784 is a surface mount plate and comes with an impact-resistant, plastic ramped collar. Model FE200844 is a flush mount plate and comes with a stainless steel case. WEIGHT: Both models weigh one pound.
Sure-Lok Series L Track
Sure-Lok Series L Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Track is made of aluminum with a natural finish, and is available in heavy-duty or medium-duty weights. Both the heavy-duty and medium-duty track are available in plain style or with flanges or flanges and mounting holes (100-inch length); with four countersunk holes (8 foot length); or with two holes (9 foot section). Medium-duty track is also a
Sure-Lok Shoulder Belt (Models Fe200599, Fe200604, Fe200604L, Fe200613, Fe200710, Fe200710L, Fe200716, Fe200732)
The Sure-Lok Shoulder Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Models FE200599, FE200613, FE200716, and FE200732 are non-retractable shoulder belts that can be attached to a section of track mounted on the vehicle sidewall. Models FE200599 and FE200732 are designed for use with Series L track; models FE200613 and FE200716 are designed for use with Series A track (see separate entries). These models are intended for us
Tie Tech 700 Series Restraint System
The Tie Tech 700 Series Restraint System is a wheelchair restraint system designed to provide secure tie down for people who travel in wheelchairs in vehicles. The system includes tracks that mount securely to the floor of any vehicle. The torso harness straps and lap strap attach independently to the tracks, behind the passenger and then snap together in the front, forming one unit. Wheelchair straps, two on each side to form a four-point system, attach from the wheelchair to the tracks in fron
Van Seat Extention
CUSTOM ADAPTATIONPURPOSE: To enable transfers from the second row seat on the door side of a van, which was too distant for easy transfer. A padded box seat was built to temporarily fill the gap while the passenger enters the van. The box seat is removed to close the door. TITLE: The Van Seat Extention. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.
Wheelchair And Occupant Belt / Track System.
The Wheelchair and Occupant Belt/Track System has successfully impact tested at 30 MPH/20G. This test simulated the performance criteria required in FMVSS ##208, 209 and 210. Two models of shoulder restraints available, wall mounted non-retractable, and retractable. Tracks are installed in the floor of the van, in front and behind the chair, to lock the front and rear of the wheelchair frame in place. Web stiffeners are installed in the lap belt portion of the restraint to assist in connecting t
Wheelchair Chest Restraint
The Wheelchair Chest Restraint is a seat belt intended for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. This adjustable Velcro belt mounts onto wheelchair to secure occupant of chair. A separate restraint is needed to hold wheelchair securely to vehicle. Manufacturer states that this restraint should not to be used instead of an automotive seat belt.
Wheelchair Seatbelt Holdown (Model 126)
The Wheelchair Seatbelt Holdown, model 126, is a restraint system designed to keep wheelchair occupants secure when in a vehicle. The extra-long seatbelt straps attach to the floor with angles or Wheelwells (see separate entry), wrap around the armrests and in front of the wheelchair user.